- All
- Favorite
- Popular
- Most rated
- Expired
GENERAL SPECIFICATIONS
- N-Power: 150W
- Peak Power: 1000W
- Distortion (THD): <0.2%
- Signal To Noise Ratio: >90dB
- Frequency Response: 20Hz -150Hz
- Input Sensitivity,High Level: 0.5V
- Input Sensitivity,Low Level: 110mV
- Low Pass Flter:50Hz - 150Hz
- Bass Boost: 0dB + 12dB
- Fuse Rating: 20A
- Subwoofer: 10 inch, 2ohm
- Unit Dimension (LxWxH): 345x245x70mm
GENERAL SPECIFICATIONS
- N-Power: 100W
- Peak Power: 650W
- Distortion (THD): <0.5%
- Signal To Noise Ratio: >90dB
- Frequency Response: 20Hz-180Hz
- Input Sensitivity, High Level: 1.0V
- Input Sensitivity, Low Level: 300mV
- Low Pass Filter: 50Hz-180Hz
- Bass Boost: 0 to -12dB
- Fuse Rating: 20A
- Subwoofer: 8 inch, 4 ohm
- Unit Dimension: 290x210x69mm
GENERAL SPECIFICATIONS
- N-Power: 150W
- Peak Power: 900W
- Distortion (THD): ≤0.2%
- Signal To Noise Ratio: ≥90dB
- Frequency Response: 20Hz-150Hz
- High Level: 0.5V
- Low Level: 110mV
- Low Pass Filter: 50Hz-150Hz
- Bass Boost: 0 to +12dB
- Fuse Rating: 20A
- Subwoofer: 10 inch, 2 ohm
- Unit Dimension: 345x261x71mm
GENERAL SPECIFICATIONS
- N-Power Output @4ohm: 60W x 4
- Signal To Noise Ratio: >90dB
- Sensitivity: 0.15V - 8V
- Fuse Size: 20A x 2
- Net Weight: Approx. 2.5kg
- N-Power Output @2ohm Bridged: 120W x 2
- Distortion (THD): <0.1%
- Frequency Response: 20Hz - 20kHz
- Unit Dimension (LxHxW): 322 x 222 x 54mm
GENERAL SPECIFICATIONS
- Subwoofer: 8” Active Tunnel Tube
- N-power: 100W
- Peak Power: 650W
- Impedance: 4Ω
- Frequency Response: 20Hz-12kHz
- Sensitivity (SPL/1W/1m): 90±3dB
- Subwoofer Magnet: 120x70x20mm,Y25
- Magnet Mass:24.9 Oz(706g)
- Unit Dimensions: 475/365x240x260mm
- Net Mass(1pc):Approx. 5.5kg
GENERAL SPECIFICATIONS
- Subwoofer: 10” Active Tunnel Tube
- N-power: 120W
- Peak Power: 750W
- Impedance: 4Ω
- Frequency Response: 20Hz-12kHz
- Sensitivity (SPL/1W/1m): 90±3dB
- Subwoofer Magnet: 120x70x20mm,Y25
- Magnet Mass:24.9 Oz(706g)
- Unit Dimensions: 480/360x290x315mm
- Net Mass(1pc):Approx. 6.6kg
GENERAL SPECIFICATIONS
- Subwoofer: 12” Active Tunnel Tube
- N-power: 120W
- Peak Power: 750W
- Impedance: 4Ω
- Frequency Response: 20Hz-12kHz
- Sensitivity (SPL/1W/1m): 90±3dB
- Subwoofer Magnet: 140x70x20mm,Y25
- Magnet Mass:38.9 Oz(1102g)
- Unit Dimensions: 475/355x340x360mm
- Net Mass(1pc):Approx. 9.0kg
GENERAL SPECIFICATIONS
- Type: Coaxial Speakers
- Size: 6'' (15.2cm)/6.5'' (16.5cm) 2-way
- Peak Power: 200W
- N-Power: 30W
- Frequency Response: 96-19.5k Hz
- Sensitivity (dB/W/m): 92±3dB
- Impedance: 4Ω
- Mounting Depth: >1.7" (44mm)
- Voice Coil: ASVφ25.5mm
- Magnet Mass: 5 Oz (142g)
- Net Weight: Approx. 1.0kg
GENERAL SPECIFICATIONS
- Type: Coaxial Speakers
- Size: 6x9'' (15.2x22.9cm) 3-way
- Peak Power: 260W
- N-Power: 40W
- Frequency Response: 55-19.5k Hz
- Sensitivity (dB/W/m): 90±3dB
- Impedance: 4Ω
- Mounting Depth: >2.7" (69mm)
- Voice Coil: ASVΦ25.5mm
- Magnet Mass: 10 Oz (283g)
- Net Weight: Approx. 1.8kg
GENERAL SPECIFICATIONS
- Type:Coaxial Speakers
- Size:5.25” (13.3cm) 2-way
- Peak Power: 150W
- N-Power: 25W
- Frequency Response: 82-19.5kHZ
- Sensitivity (dB/W/m): 87±3dB
- Impedance: 4Ω
- Mounting Depth: >1.6” (40.6mm)
- Voice Coil: ASVΦ 20.4mm
- Magnet Mass: 4Oz (113g)
- Net Weight: Approx. 0.6kg
GENERAL SPECIFICATION -1-DIN detachable digital media receiver -2-Line large VA LCD display -Support for Lossless music playback -Built-in Bluetooth, support A2DP Bluetooth music -Support USB for music files -Built-in radio receiver, support RDS receiver -Built-in amplifier, maximum power 4x50W -Support mobile APP control -4 channel FL/FR/RL/RR preoutput With wireless remote control -Support 1A phone charging -Support rear MIC interface -Cast aluminum heat sink -Digital clock display -Dynamic boot logo -Front AUX input -Operated power: DC 10.8V-16V -Product size: 178 x 50 x 108mm
6.95" CAR Digital Media Receiver, APPLE CARPLAY & ANDROID AUTO, USB, DVD,Bluetooth, GPS (NAVIGATION) Remote Control,USB Micro-A, 3 Preout, ipod iphone support/ Mp3 & WMA, builtin Staring weel control
GENERAL SPECIFICATION
- Speaker Type: 25mm KSV TWEETER SYSTEM
- N-Power: 20W
- Peak Power: 200W
- Impedance: 3Ω
- Voice Coil: Φ25.5 mm KSV
- Magnet Mass: 1.05Oz (30g)
- Sensitivity (dB/W/m): 89±3dB
- Frequency Response: 310-20kHz
- Net Weight: Approx. 0.45 kg
COTTON NON-WOVEN PROTECTIVE LAYER SOUND & DUST PROOF DOUBLE LAYER PP-PET SOUND ABSORBING AND THERMAL INSULATION IT CAN BE CAR NOISE INTO HEAT WHITE EFFICIENTLY BLOCKING OF EXTERNAL HEAT CONDUCTION TO THE CAB
- Woofer: 12” (305mm)
- N-power: 120W
- Peak Power: 1200W
- Impedance: 4Ω
- Frequency Response: 20-800Hz
- Sensitivity (SPL/1W/1m): 90±2dB
- Subwoofer Magnet: 126x60x20mm
- Power Requirements: 12V DC Car Battery (Negative Ground)
- Power Supply Voltage: 14.4V (10.5V~16V)
- Bass Tube Dimensions: 17.7”x13.8”x14.2” (470x370x308mm)
- Gift Box Dimensions: 470x370x308mm
- Woofer: 8” (210mm)
- N-power: 80W
- Peak Power: 800W
- Impedance: 4Ω
- Frequency Response: 40-1.2kHz
- Sensitivity (SPL/1W/1m): 87±2dB
- Subwoofer Magnet: 100x45x20mm
- Power Requirements: 12V DC Car Battery (Negative Ground)
- Power Supply Voltage: 14.4V (10.5V~16V)
- Bass Tube Dimensions: 14.2”x 9.8”x 10.2” (360x250x260mm)
- Gift Box Dimensions: 375x265x280mm
★★★★★
- N-Power: 80W
- Peak Power: 1000W
- Distortion (THD): <0.2%
- Signal To Noise Ratio: >60dB
- Frequency Response: 20Hz -150Hz
- Input Sensitivity,High Level: 1.0V
- Input Sensitivity,Low Level: 300mV
- Low Pass Filter: 50Hz - 150Hz
- Bass Boost: 0dB + 12dB
- Subsonic Filter: 20Hz (Fixed)
- Fuse Rating: 10A
- Subwoofer: 8 inch, 4ohm
- Unit Dimension (LxWxH): 290x210x72mm
1. DIAMOND SHAPED LAYERING EFFECTIVE SOLUTION AGAINST NOISE PRODUCED BY THE BACK OF THE SPEAKER, ENABLES HIGH-FREQUENCY SPEAKER TO PRODUCE CLEARER MUSIC. 2. ALUMINUM LAYERING ALUMINUM IS AN EFFECTIVE VIBRATION SUPPRESSION MATERIAL. IN ADDITION, WITH THE PROPERTIES OF THIS MATERIAL, IT HELPS TO MAKE THE VEHICLE INTO A SPEAKER BOX, ALLOWING CONSUMER TO LISTEN TO GOOD MUSIC 3. BUTYL POLYMER DAMPING LAYER CONVERTS THE VIBRATION ENERGY INTO HEAT ENERGY, AUTOMOTIVE VIBRATION ENERGY IN TO HEAT ENERGY, WITH THE REDUCTION IN VIBRATION, IT ALLOWS THE SPEAKERS TO PERFORM AT ITS PRIME, GIVING IF EASY ACCESS TO A 3DB BOOST IN SOUND 4. DOUBLE-SIDED SILLCONE RELEASE PAPER
GENERAL SPECIFICATIONS
- Output Wattage: 50 Watts
- CAR Digital Media Receiver
- USB, DVD,Bluetooth
- Remote Control
- USB Micro-A
- 3 Preout
- ipod iphone support
- Mp3 & WMA
GENERAL SPECIFICATIONS
- 6.95" CAR Digital Media Receiver
- USB DVD
- Bluetooth
- GPS (NAVIGATION)
- Remote Control
- USB Micro-A
- 3 Pre-out
- ipod iphone support/ Mp3 & WMA
- built-in Staring wHeel control
6.2" CAR Digital Media Receiver, USB DVD,Bluetooth, Remote Control,USB Micro-A, 3 Preout, ipod iphone support/ Mp3 & WMA, builtin Staring weel control
6.95" CAR Digital Media Receiver, USB DVD,Bluetooth, Remote Control,USB Micro-A, 3 Preout, ipod iphone support/ Mp3 & WMA, builtin Staring weel control
4in AUX / 6out AUX, 10EQ DSP AMPLIFIER, BLUETOOTH 4.0, HIGH/LOW PASS FILTER, PLUG & PLAY OPTIOANAL OEM CABLE, 50WATTSx4
10CM / 4", 4WAY CAR AUDIO SPAEKER, MAXIMUM MUSIC POWER 320W, NOMINAL POWER/RMS 16W, IMPEDANCE 4 OHMS
13CM / 5", 4WAY CAR AUDIO SPAEKER, MAXIMUM MUSIC POWER 360W, NOMINAL POWER/RMS 18W, IMPEDANCE 4 OHMS
16CM / 6", 4WAY CAR AUDIO SPAEKER, MAXIMUM MUSIC POWER 400W, NOMINAL POWER/RMS 20W, IMPEDANCE 4 OHMS
GENERAL SPECIFICATIONS
- BT: 5.0
- BLUETOOTH® TRANSMITTER POWER: 0.25MW (-6-4DB)
- BLUETOOTH® TRANSMITTER FREQUENCY RANGE: 2402 ~ 2480 MHZ
- BLUETOOTH® TRANSMITTER MODULATION: GFSK
- BT SUPPORT: AVRCP、A2DP、HFP、HSP
- IPX: IPX7
- OUTPUT POWER: 45MM 10W*2
- MUSIC PLAYING TIME: 2-6H
- ACCESSORIES: 3.5MM AUDIO CABLEINPUT/TYPE-C CHARGNG CABLE
- AUTO-POWER OFF: YES (AUTO-POWER OFF AFTERDISCONNECTING MORE THAN 10 MINS)
- SPEAKERPHONE: YES
- BATTERY: 3000MAH
- CHARGING TIME: 3-5H
- VOICE ASSISTANT INTEGRATION: NO
- DIMENSION(CM): 7.1X7.36X16.96
- NET WEIGHT: 500G±10G
10″ Dual Active Subwoofer Box (built-in AMP) 1000W Subwoofer Speaker size: 10″x2pcs N-power: 100W Impedance: 4Ω Material of cone: Reinforce paper Surround: Rubber Fre. Response: 40Hz – 500Hz Sensitivity(1W/m): 88dB Voice Coil: SVC 40mm Amplifier RMS power: 230W@4Ω 1%THD Fre. Response: 15-150Hz THD+N: <0.05% S/N ratio: >80dB Phase shift: 0°,180° Fuse Rating: 25A Dimensions(L/W/H): 337x290x270mm Input type: RCA or High level input Low pass Filiter: 50-150 Hz @12dB/Oct or 18dB/Oct Selectable Subsonic filiter: 2dB/Oct fixed at 15Hz
- N-Power Output @4ohm: 75W x 6
- N-Power Output@2ohm: 100W x 6
- N-Power Output @4ohm (bridged): 150W x 3
- Frequency Response: 20Hz - 20kHz
- Sensitivity: 0.15V - 8V
- Signal To Noise Ratio: ≥90dB
- Distortion (THD): ≤0.1%
- Fuse Size: 35Ax2
- Net Weight: Approx. 2.6kg
- Unit Dimension (LxHxW): 300x212x50mm
- N-Power Output @4ohm: 75W x 2
- N-Power Output@2ohm: 100W x 2
- N-Power Output @4ohm (bridged): 150W x 1
- Frequency Response: 20Hz - 20kHz
- Sensitivity: 0.15V - 8V
- Signal To Noise Ratio: ≥90dB
- Distortion (THD): ≤0.1%
- Fuse Size: 20Ax1
- Net Weight: Approx. 1.7kg
- Unit Dimension (LxHxW): 240x212x50mm