- All
- Favorite
- Popular
- Most rated
- Expired
GENERAL SPECIFICATIONS
- N-Power: 150W
- Peak Power: 1000W
- Distortion (THD): <0.2%
- Signal To Noise Ratio: >90dB
- Frequency Response: 20Hz -150Hz
- Input Sensitivity,High Level: 0.5V
- Input Sensitivity,Low Level: 110mV
- Low Pass Flter:50Hz - 150Hz
- Bass Boost: 0dB + 12dB
- Fuse Rating: 20A
- Subwoofer: 10 inch, 2ohm
- Unit Dimension (LxWxH): 345x245x70mm
GENERAL SPECIFICATIONS
- N-Power: 100W
- Peak Power: 650W
- Distortion (THD): <0.5%
- Signal To Noise Ratio: >90dB
- Frequency Response: 20Hz-180Hz
- Input Sensitivity, High Level: 1.0V
- Input Sensitivity, Low Level: 300mV
- Low Pass Filter: 50Hz-180Hz
- Bass Boost: 0 to -12dB
- Fuse Rating: 20A
- Subwoofer: 8 inch, 4 ohm
- Unit Dimension: 290x210x69mm
GENERAL SPECIFICATIONS
- N-Power: 150W
- Peak Power: 900W
- Distortion (THD): ≤0.2%
- Signal To Noise Ratio: ≥90dB
- Frequency Response: 20Hz-150Hz
- High Level: 0.5V
- Low Level: 110mV
- Low Pass Filter: 50Hz-150Hz
- Bass Boost: 0 to +12dB
- Fuse Rating: 20A
- Subwoofer: 10 inch, 2 ohm
- Unit Dimension: 345x261x71mm
GENERAL SPECIFICATIONS
- N-Power Output @4ohm: 60W x 4
- Signal To Noise Ratio: >90dB
- Sensitivity: 0.15V - 8V
- Fuse Size: 20A x 2
- Net Weight: Approx. 2.5kg
- N-Power Output @2ohm Bridged: 120W x 2
- Distortion (THD): <0.1%
- Frequency Response: 20Hz - 20kHz
- Unit Dimension (LxHxW): 322 x 222 x 54mm
GENERAL SPECIFICATIONS
- Subwoofer: 8” Active Tunnel Tube
- N-power: 100W
- Peak Power: 650W
- Impedance: 4Ω
- Frequency Response: 20Hz-12kHz
- Sensitivity (SPL/1W/1m): 90±3dB
- Subwoofer Magnet: 120x70x20mm,Y25
- Magnet Mass:24.9 Oz(706g)
- Unit Dimensions: 475/365x240x260mm
- Net Mass(1pc):Approx. 5.5kg
GENERAL SPECIFICATIONS
- Subwoofer: 10” Active Tunnel Tube
- N-power: 120W
- Peak Power: 750W
- Impedance: 4Ω
- Frequency Response: 20Hz-12kHz
- Sensitivity (SPL/1W/1m): 90±3dB
- Subwoofer Magnet: 120x70x20mm,Y25
- Magnet Mass:24.9 Oz(706g)
- Unit Dimensions: 480/360x290x315mm
- Net Mass(1pc):Approx. 6.6kg
GENERAL SPECIFICATIONS
- Subwoofer: 12” Active Tunnel Tube
- N-power: 120W
- Peak Power: 750W
- Impedance: 4Ω
- Frequency Response: 20Hz-12kHz
- Sensitivity (SPL/1W/1m): 90±3dB
- Subwoofer Magnet: 140x70x20mm,Y25
- Magnet Mass:38.9 Oz(1102g)
- Unit Dimensions: 475/355x340x360mm
- Net Mass(1pc):Approx. 9.0kg
- Woofer: 12” (305mm)
- N-power: 120W
- Peak Power: 1200W
- Impedance: 4Ω
- Frequency Response: 20-800Hz
- Sensitivity (SPL/1W/1m): 90±2dB
- Subwoofer Magnet: 126x60x20mm
- Power Requirements: 12V DC Car Battery (Negative Ground)
- Power Supply Voltage: 14.4V (10.5V~16V)
- Bass Tube Dimensions: 17.7”x13.8”x14.2” (470x370x308mm)
- Gift Box Dimensions: 470x370x308mm
- Woofer: 8” (210mm)
- N-power: 80W
- Peak Power: 800W
- Impedance: 4Ω
- Frequency Response: 40-1.2kHz
- Sensitivity (SPL/1W/1m): 87±2dB
- Subwoofer Magnet: 100x45x20mm
- Power Requirements: 12V DC Car Battery (Negative Ground)
- Power Supply Voltage: 14.4V (10.5V~16V)
- Bass Tube Dimensions: 14.2”x 9.8”x 10.2” (360x250x260mm)
- Gift Box Dimensions: 375x265x280mm
★★★★★
- N-Power: 80W
- Peak Power: 1000W
- Distortion (THD): <0.2%
- Signal To Noise Ratio: >60dB
- Frequency Response: 20Hz -150Hz
- Input Sensitivity,High Level: 1.0V
- Input Sensitivity,Low Level: 300mV
- Low Pass Filter: 50Hz - 150Hz
- Bass Boost: 0dB + 12dB
- Subsonic Filter: 20Hz (Fixed)
- Fuse Rating: 10A
- Subwoofer: 8 inch, 4ohm
- Unit Dimension (LxWxH): 290x210x72mm
4in AUX / 6out AUX, 10EQ DSP AMPLIFIER, BLUETOOTH 4.0, HIGH/LOW PASS FILTER, PLUG & PLAY OPTIOANAL OEM CABLE, 50WATTSx4
10″ Dual Active Subwoofer Box (built-in AMP)
1000W
Subwoofer
Speaker size: 10″x2pcs
N-power: 100W
Impedance: 4Ω
Material of cone: Reinforce paper
Surround: Rubber
Fre. Response: 40Hz – 500Hz
Sensitivity(1W/m): 88dB
Voice Coil: SVC 40mm
Amplifier
RMS power: 230W@4Ω 1%THD
Fre. Response: 15-150Hz
THD+N: <0.05% S/N ratio: >80dB
Phase shift: 0°,180°
Fuse Rating: 25A
Dimensions(L/W/H): 337x290x270mm
Input type: RCA or High level input
Low pass Filiter: 50-150 Hz @12dB/Oct or 18dB/Oct Selectable
Subsonic filiter: 2dB/Oct fixed at 15Hz
- N-Power Output @4ohm: 75W x 6
- N-Power Output@2ohm: 100W x 6
- N-Power Output @4ohm (bridged): 150W x 3
- Frequency Response: 20Hz - 20kHz
- Sensitivity: 0.15V - 8V
- Signal To Noise Ratio: ≥90dB
- Distortion (THD): ≤0.1%
- Fuse Size: 35Ax2
- Net Weight: Approx. 2.6kg
- Unit Dimension (LxHxW): 300x212x50mm
- N-Power Output @4ohm: 75W x 2
- N-Power Output@2ohm: 100W x 2
- N-Power Output @4ohm (bridged): 150W x 1
- Frequency Response: 20Hz - 20kHz
- Sensitivity: 0.15V - 8V
- Signal To Noise Ratio: ≥90dB
- Distortion (THD): ≤0.1%
- Fuse Size: 20Ax1
- Net Weight: Approx. 1.7kg
- Unit Dimension (LxHxW): 240x212x50mm
- N-Power Output @4ohm: 75W x 4
- N-Power Output@2ohm: 100W x 4
- N-Power Output @4ohm (bridged): 150W x 2
- Frequency Response: 20Hz - 20kHz
- Sensitivity: 0.15V - 8V
- Signal To Noise Ratio: ≥90dB
- Distortion (THD): ≤0.1%
- Fuse Size: 20Ax2
- Net Weight: Approx. 2.3kg
- Unit Dimension (LxHxW): 318x212x51mm
Our Nakamichi NBX25L wedge shaped active subwoofer box features a 10" subwoofer driver powered by our built in amplifier featuring the same technologies as our amplifier line, but tuned specifically for the driver.
Featuring 130 watts of RMS power, the NBX25L is designed to fit neatly in the boot, just behind the passenger seat, and provide an instant boost to the low frequencies from your original factory source unit or aftermarket units. Also included in the original design is our passive bass port for improved bass response.
Save the hassle of building your own subwoofer box with our pre-designed and tuned NBX25L.
SPECIFICATIONS
- Woofer: 10” (256mm)
- N-Power: 100W
- Peak Power: 1000W
- Impedance: 4Ω
- Frequency Response: 45-1.3kHZ
- Sensitivity (dB/W/m): 88 ±3dB
- Subwoofer Magnet: 120x60x20mm
- Power Requirements: 12DC Car Battery(Negative Ground)
- Power Supply Voltage: 14.4V(10.5V - 16V)
- Unit Dimension: 23.0”×5.7” / 8.1”×12.8” (585x145 / 205x325mm)